Die Kilometerangaben entsprechen der direkten Entfernung Luftlinie zwischen dem Sonderziel und dem aktuellen Standort. Die Pfeile hinter den Entfernungsangaben deuten die Luftlinienrichtung zum entsprechenden Sonderziel an z. Sonderziel liegt in Fahrtrichtung, Sonderziel liegt entgegen der Fahrtrichtung. Nach kurzer Zeit erscheint die folgende Anzeige.
Die hier in den Bildern gezeigten Kategorien und Sonderziele sind Beispiele. Um die Eingabe eines Sonderziels von der Sonderziel- bzw. Die vorliegende Lizenz berechtigt nicht zur Vergabe von Unterlizenzen. Die Nutzung der Daten ist nur in diesem spezifischen Becker-System gestattet. Die aktuelle Position kann gespeichert und im Zielspeicher abgelegt werden. Durch den Stern kann man, auch wenn eine unbekannte Sprache eingestellt wurde, erkennen mit welchem Eintrag die Sprache eingestellt werden kann.
Standort Speichern X Mit der Multifunktionstaste bzw. Um das Ziel zu erreichen, muss den Richtungspfeilen gefolgt werden. Diese Einstellung kann z. Die vom Navigationssystem angezeigte Geschwindigkeitsbegrenzung kann im Einzellfall falsch sein. Der Fahrer muss in jeder Situation selbst entscheiden, ob er die angezeigte Geschwindigkeitsbegrenzung befolgt. Diese Einstellung ist die Grundeinstellung.
Befahren Sie bei eingeschalteter Speedlimit Anzeige eine Strecke mit einer Geschwindigkeitsbegrenzung und diese ist auf der Navigations-CD gespeichert wird im rechten Teil der Anzeige das entsprechende Symbol mit der Geschwindigkeitsbegrenzung angezeigt.
Der zuletzt eingestellte Wellenbereich wird eingestellt. Seek Name angezeigt wird. Rechten Drehregler drehen. Ein automatischer Sendersuchlauf beginnt. Speichern: Es lassen sich je 12 Frequenzen oder Programme abspeichern.
Abrufen: Multifunktionstaste bzw. Der gespeicherte Sender wird aufgerufen. Multifunktionstaste cken. In diesem Zustand kann es vorkommen, dass durch RDS-Diversity ein Umschalten zwischen verschiedenen Regionalprogrammen mit unterschiedlichen Sendeinhalten erfolgt.
Werden mehrere Regionalprogramme von einer Sendeanstalt ausgestrahlt, so wird dies erst bei der Anwahl der Sendeanstalt ersichtlich. Bei der Anwahl einer dieser Sender z. X Mit der Multifunktionstaste die Regionalisierung ein- on oder ausschalten off. Nur so kann der daraus resultierenden Unfallgefahr vorgebeugt werden. Mit der Multifunktionstaste den Radiotext einschalten. Das Autoradio filtert, aus den vom Sender angebotenen Daten, eine Radiotext Information heraus und stellt sie dar.
So kann z. Wenn TP aktiviert ist wird im Display durch auf den aktivierten Verkehrsfunk hingewiesen. Nach dem Umschalten auf Normalanzeige ist TP abgeschaltet. Nach dem Einstellen eines TP- bzw. X Eine momentan gesendete Durchsage kann unterbrochen werden. Bei der Einstellung Audio Sig. Das Display klappt nach unten und der CD-Schacht wird sichtbar. Jetzt das Display wieder nach oben klappen.
Das Display klappt nach unten und die CD wird ausgeworfen. X CD entnehmen. X Das Display wieder nach oben klappen. Analog erfolgt ebenfalls ein Wechsel vom ersten auf den letzten Titel. X Durch Loslassen der Multifunktionstaste bzw.
Im Display erscheint. Der Schriftzug Rpt wird invers dargestellt. Danach werden die Titel der aktuellen CD in beliebiger Reihenfolge abgespielt.
Der Schriftzug Rnd wird invers dargestellt. Es wird die aktuelle Titelnummer und die gesamt Titelanzahl angezeigt. Beim Ansprechen der ersten Temperaturschwelle dieser Schutzschaltung erscheint die folgende Anzeige. Beachten Sie hierbei jedoch die rechtlichen Vorgaben. Soweit Sie selbst, z. Dabei ist zu beachten, dass bei MP3-Dateien mit variabler Bitrate die Anzeige der bisher abgelaufenen Spielzeit von der realen Zeit abweichen kann.
B Rock zusammengefassen. X MP3 CD entnehmen. X Hinweis: Wird der letzte Titel des Folders bzw. Alle nachfolgenden Titel des aktuellen Folders bzw. Durch Loslassen der Multifunktionstaste bzw. Danach werden die Titel des aktuellen Folders bzw. Es wird die aktuelle Folder- bzw. Playlistnummer und die aktuelle Titelnummer angezeigt. Multifunktionstaste bzw. Es wird der Name des Folders bzw. War der CD-Wechslerbetrieb zuletzt eingestellt bzw.
Das Magazin wird ausgeschoben und kann entnommen werden. Larger cities and communities are comprehensively covered. For smaller towns and communities, the regional and unclassified roads or access roads and the town centres are included. One-way streets, pedestrian zones, turn bans and other traffic regulations are taken into account as far as possible. Note: For Norway, Sweden, Finland, the Czech Republic and Denmark, non-verified data has been used to achieve a high depth of digitisation; i.
All roads can be used, but optimum route guidance cannot be guaranteed. Note: There may be discrepancies between the data on the navigation CD and the actual local situation, due to continual changes to road systems and their traffic regulations. Select the country of destination. Then enter the town required.
You can now select the town centre and start route guidance. You will then be guided to the centre of the town required. In this case, the direction arrow indicates the linear direction to the selected town centre. If you would like to be directed to a particular road at the destination you can, as soon as you are on a trunk road or in the area completely covered by CD 3 , insert CD 3, enter the exact address of the destination and begin guidance to this road.
In this case, the direction arrow always indicates the linear direction to the nearest trunk road. Confirm this message by pressing the right rotary control. A progress indicator is displayed while the map data is being loaded. You can enter the required destination once the progress indicator has disappeared.
The Navigation menu is automatically displayed when navigation announcements are given. The entries are automatically completed. A space i. The individual characters can be selected by pressing the relevant multifunction buttons repeatedly. Selection can also be made using the right rotary control , which will be used in the remainder of this guide. The system recalculates the navigation if a deviation is made from the route. Briefly press the left rotary control to hear the current navigation announcement.
During a navigation announcement, the volume can be adjusted using the left rotary control , and the tone by pressing see also page Quickly pressing the left rotary control switches the navigation announcements back on. Each entry in the list shown in capital letters can be selected by pressing the right rotary control.
The main navigation menu appears after this display. Note: The navigation CD must be loaded when starting navigation mode for the first time. If calibration of the navigation system has not yet been completed, the system will prompt you to take a drive for calibration. A navigation CD containing the data for the target country is required for navigation mode. The navigation CD must be inserted to start the calculation of a route.
During calculation, the prompt CD will flash in the display. Once calculation is completed, the prompt CD will disappear, the navigation CD can be removed and an audio CD may be inserted. When entering destinations, driving off should be delayed until the prompt CD disappears.
Menu for selecting regional and interregional destinations of special interest and local points of interest. Points of interest include petrol stations, airports or hospitals, for example.
With the right rotary control , the desired destination can be selected. By pressing the left rotary control , information on the destination can be called up before confirming by pressing the right rotary control. Stopovers are not stored as last destinations.
Destination entry! Selecting a country! If your destination is in a country other than the one currently shown, select the country in the example GERMANY with the right rotary control and press the control to confirm. Select the desired country with the right rotary control and press to confirm. Note: When selecting a distant destination, we recommend selecting a stopover Page 26 halfway. Entering a destination The last location entered is displayed.
If your destination is located elsewhere, select the place using the right rotary control and press to confirm. Select the letters one after another by turning the right rotary control and press to confirm. The selected letter appears enlarged at the right of the display. Use multifunction button the last confirmed letter. For the purpose of support, the name of the location closest to the previous entry is displayed.
The unit offers only the possible remaining letters for selection. If no other entries are available, the unit completes the place name automatically. To accept the entry, press and hold the right rotary control for more than 2 seconds or select the small tick and briefly press the right rotary control. If the complete location name has been entered or completed automatically; i. If there are no roads or only the centre is available for a particular town, the unit will switch directly to the Route menu.
If an incomplete location entry was confirmed, the location selection list is displayed. The location name most similar to the entry appears in capital letters in the location selection list.
The scroll marks indicate that other locations, sorted in alphabetical order, can be selected. A selection can be made by turning the right rotary control and pressing to confirm. The display then shows either the destination corresponding to the post code or, if the post code is shared among several towns, a list containing these towns. The location distinguishing list is displayed if the selection is ambiguous.
Select the required location using the right rotary control and press the control to confirm. The program returns to the Road or Centre Entry. Using the right rotary control , enter the post code for the destination and press for more than 2 seconds to confirm the entry.
To confirm, the small tick can also be selected and the right-hand rotary control pressed briefly. Select the required location using the right rotary control and press to confirm. If more than 9 locations share the same post code, the display will show the location input menu instead of the abovementioned list. The program returns to road or centre entry. If there are no roads in the selected town or only the centre can be selected, the unit will switch directly to the route menu.
Select ROAD with the right rotary control and press the control to confirm. Already entered letters are displayed inversely. To help, the road name most similar to the entry so far is displayed. If no other entries are available, the unit completes the road-name.
The road name most similar to the entry appears in capital letters in the road selection list. The scroll marks indicate that other roads, sorted in alphabetical order, can be selected. Use multifunction button to delete the last confirmed letter. The complete entry can be deleted by pressing multifunction button for more than 2 seconds. If the road name was entered completely or automatically completed, the program switches to either the road-distinguishing list same road name exists more than once in the location selected or returns to the Route menu.
If an incomplete location entry was confirmed, the road selection list is displayed. If a definite entry is given, the program returns to the Route menu.
If an entry is unclear same road exists more than once in the same location , the road distinguishing list is shown. Select the required part of town using the right rotary control and press the control to confirm. Program switches to the Route menu. Page 21 Navigation mode Entering the destination town centre!
If the previously selected location has only one centre, the program immediately switches to the Route menu. If the number of centres is less than 10, the centre list is displayed. Select the centre by turning the right rotary control and press the control to confirm. If the number of centres is greater than 9, the program switches to centre entry.
Once the complete centre name is entered or automatically completed, the program switches to the Route menu. The program switches to the centre list if the selection is ambiguous.
For your help, the centre most similar to the entry so far is displayed. If no other entries are available, the unit completes the centre-name. The centre most similar to the entry appears in capital letters in the centre list. The scroll marks indicate that other centres, sorted in alphabetical order, can be selected. Destination input via coordinates If the geographical coordinates latitude and longitude of a destination are known, these can be entered and route guidance to the destination started.
Enter the latitude of the destination using the right-hand rotary control. Entries must be made in degrees, minutes, seconds and a direction as the crow flies, e. To confirm the entry, press and hold the right-hand rotary control for more than 2 seconds. Select the small tick and briefly press the right rotary control. Enter the longitude of the destination using the right-hand rotary control as described above. Note: If the coordinates entered are located beyond the boundaries of the digital map, a message will appear notifying you of this.
The system cannot navigate to a position beyond the boundaries of the digital map. The navigation system then requests a name to be entered for the entered coordinates. The program then switches to the Route menu. Route guidance can now start. Using the right rotary control , enter the house number for the destination road and press for more than 2 seconds to confirm the entry. This function is only possible if the information is contained on the Navigation CD R. Due to system configuration, route guidance will only be given to the area of the entered house number.
Select by turning the right rotary control and press to confirm selection. Selecting intersection for destination road! Selecting route settings! Select the intersection for the destination road by turning the right rotary control and press the control to confirm. Make your selection by turning the right rotary control , and change any settings by pressing it.
Press the control for more than 2 seconds to accept all settings and exit the menu. Note: Routes without motorways can only be calculated for short distances up to at most km depending on the density of digitisation.
Storing a destination in the destination memory It is not mandatory for navigation to store a destination in the destination memory. However, it saves repeated manual entry if the destination is required again at a later date.
A name of your choice consisting of up to 20 characters can be entered for the specified destination, and is stored automatically in the destination memory by pressing the right rotary control for more than 2 seconds. The destination can also be stored by selecting the small tick and briefly pressing the right rotary control.
If you do not wish to enter a name of your choice, press and hold the right rotary control for more than 2 seconds to store the previously entered destination in the destination memory. The last destination entered can be filed into any desired position in the Destination Memory by turning the right rotary control. The memory position is confirmed by briefly pressing the right rotary control.
A total of 50 destinations can be stored. Select destination page After the first route guidance announcement, the prompt CD will continue to flash on the display until the route is completely calculated.
When a distant destination is entered, it is recommend that you wait until CD has stopped flashing before departing. Recalculating route. Appears when the destination memory is full and if no other destinations can be saved.
The destination memory is opened by pressing the right rotary control. Destinations can then be deleted from the destination memory, as described above, to make space for the new entry to be saved. The save is interrupted by pressing the button. Entering a stopover! Press the multifunction button. Using the right rotary control , make a selection and press the control to confirm.
Deleting a stopover! Press the Detour function multifunction button. Starting route guidance to a stopover Entering length of traffic jam! To start route guidance to the stopover, press the right rotary control. This function allows you to block route sections ahead from the nearest junction and to calculate a detour route when a traffic jam or road block is directly ahead. To delete the stopover, press the right rotary control within 8 seconds. Stopover reached!
Using the right rotary control , select the length of the traffic jam and press the control to confirm. The route is calculated and route guidance begins. Note: During route guidance to a stopover, is displayed inversely. To delete a block, press the right rotary control within 8 seconds. Cancelling route guidance! The route guidance is cancelled when the right rotary control is pressed within 8 seconds.
Otherwise route guidance will continue. You will receive the navigation recommendations by voice messages and screen displays. Press the left rotary control to have the current recommendation repeated. If the route to be travelled is not clear, e. Please follow the direction indicated by the arrow. The display appears for 8 seconds after the right rotary control is pressed. The progress bar on the right illustrates the distance and the black part decreases as you approach the intersection.
This recommendation prepares you for the next turn to be taken. The arrow indicates the direction of the destination as the crow flies. Note: Dynamic route guidance is not possible in all countries. Dynamic route guidance is used to calculate the route, taking current traffic announcements into account. The traffic announcements are transmitted by a TMC radio station in addition to the radio programme and are received and analysed by the navigation system.
The reception of traffic announcements is free of charge. Note: As the traffic announcements are transmitted by radio stations, we cannot assume responsibility for the completeness or accuracy of the announcements. If dynamic route guidance has been activated, a continuous check is made for the presence of relevant announcements for the selected route. If it is determined during these continuous checks that a traffic announcement is of relevance for the route guidance, the unit will automatically re-calculate a new route to the destination.
The unit will switch back to the route guidance display after a short time. Route guidance display: Current traffic announcements can be displayed in text form. There are several options for requesting current traffic information. Traffic information can be requested via the multifunction buttons and in the route guidance display and, in the case of inactive route guidance, via the multifunction button in the information menu.
By pressing the multifunction button , a list of all currently available traffic information will be displayed. By pressing the multifunction button , a list of all current traffic information relevant for the calculated route is displayed.
Information menu: For inactive route guidance, the information menu can be requested by pressing the left rotary control. A list of currently available traffic information is displayed. In the list of current traffic information, more detailed information on the individual announcements can be requested. After confirming the traffic information desired, the information is shown in its entirety.
A typical traffic announcement is shown as follows. Pressing the button returns to the list of the current traffic information. Page 33 Navigation mode Information during route guidance! Press the left rotary control. The destination, the distance and the estimated time of arrival are displayed. If a stopover has been specified, the stopover, the distance and the estimated time of arrival are displayed.
The main destination can be displayed via multifunction button. To return to route guidance, press the left rotary control again or wait for 8 seconds. Requesting journey duration and kilometres travelled!
Press the left rotary control! Press the. During route guidance, press the left rotary control. The journey duration, kilometres travelled and the average speed are displayed.
Pressing the right rotary control for more than 2 seconds resets the values to zero. Pressing the button returns to the navigation display, if navigation is active. If navigation is not active, the display shows the information menu. The current settings are displayed in a list. Scroll through the list of settings by turning the right rotary control. To change a setting select the required entry and press the right rotary control. After 8 seconds without operation, or if the button is pressed, the system returns to the route guidance display.
The changes are then active. You may then have to insert the navigation CD. Then turn the right rotary control to select the required route calculation method.
The setting is accepted by pressing the right rotary control. The list of settings is displayed again. Select ETA: from the settings and press the right rotary control.
Then turn the right rotary control to select the required setting. The selection is accepted by pressing and holding the right rotary control. Requesting current time! During navigation, press the left rotary control. During route guidance, the current position can be requested.
Press the! Current time and current date are displayed. After 8 seconds, the system returns to the navigation display. Calling up current position multifunction button. The current position with road name if available , degrees longitude and latitude, altitude above sea level and the number of satellites received are displayed. Page 37 Navigation mode With inactive route guidance, the information menu can be requested by pressing the left rotary control.
Calling up road list During route guidance, the list of roads for the planned route can be called up. Pressing the right rotary control or the button returns you to the information menu. The current road and the road names up to the destination are displayed. Scroll through the route list by turning the right rotary control. Press the Note: After entering the destination, it will take some time until the route list is compiled.
Pressing the right rotary control returns you to the route guidance display. Menu for selecting points of interest from a predetermined list. The destination memory contains personally stored destinations. Once a destination has been stored, it does not have to be manually re-entered. Select the desired destination using the right rotary control and press to confirm. Then start route guidance. Using the right rotary control , make a selection and press to confirm. In the Main Navigation Menu, select P.
Using the right rotary control , select a category and press the control to confirm. Destinations are listed according to proximity. The figures in kilometres relate to the direct distance as the crow flies between the point of interest and the current location.
The arrows following the distance information indicate the direction of the relevant point of interest e. Select the desired destination using the right rotary control. Page 39 Navigation mode By pressing the left rotary control information on the selected destination is listed i. Enter the point of interest and confirm. Confirm the point of interest in the displayed list by pressing the right rotary control.
The system jumps to the route menu. Confirm selection with the right rotary control. Using the right rotary control , select the town name and press the control to confirm. Then select the town from the town selection list using the right rotary control and press again to confirm.
Note: A list of possible points of interest is displayed by pressing the right rotary control for more than 2 seconds without having selected any letters. The points of interest for the selected town are displayed. CD The following contains a general description of the points of interest or P.
A list with special destinations is displayed or, if there are more than 9 entries in the list, you will be prompted to enter text. The valid categories for the current points of interest CD are displayed. Insert the desired points of interest CD into the CD slot. After a short time, the following display appears:!
Press the right rotary control. The categories and points of interest shown in the illustrations are examples. The actual display is dependent upon the CD used. Select the desired category with the right rotary control. Then, press the right rotary control to confirm the category. Note: If the set user language is identical with one of the languages available on the CD, the categories are displayed in this language.
If there is no correspondence, the categories are displayed in all available languages. This can be recognised by the country abbreviations in front of the category. Page 41 Navigation mode If the points of interest CD is inserted during active navigation, the system requests information on the location of the point of interest near to destination or in vicinity of current position.
If navigation is not active, this selection is skipped. After a short time, the available points of interest for the selected categories are displayed. Then, turn the right rotary control to select the desired point of interest. The point of interest is accepted by pressing the rotary control. Before confirming the point of interest, press the button to return to the selection of categories in order to select a different point of interest, if required. Press the left rotary control to display information on the point of interest.
This information may include prices, location description, general appraisal etc. Pressing the button or pressing the left rotary control returns you to the list of points of interest. Following selection of the point of interest, you are prompted to insert the navigation CD for route calculation. If the point of interest was selected during active navigation, it will be treated as a stopover. After a short time, route calculation to the selected point of interest is performed. Note: If a stopover has already been entered, it will be overwritten by the new point of interest.
In order to cancel navigation to the selected point of interest, you must either cancel navigation or cancel navigation to the stopover, as described in the complete operating guide. In order to cancel the entry of a point of interest from the point of interest P. CD, you must eject the point of interest P.
CD by pressing. The present licence does not authorise the granting of sublicenses. Use of the data is only permitted in this specific Becker system. It is forbidden to extract or make further use of significant parts of the database content, or to duplicate, copy, modify, adapt, translate, analyse, decompile or reverse engineer any part thereof.
The maximum possible care has been taken in compiling this CD. Nevertheless, some data may be incorrect or outdated. Under no circumstances do we accept any liability. System settings! Press the button in the navigation main menu. The system settings menu is requested. Page 43 Navigation mode Setting time In order to achieve correct navigation on routes with time-dependent traffic guidance, and to calculate the estimated time of arrival, it is necessary to set the GMT time transmitted from satellites to the current time zone.
With multifunction button or , the time can be changed from to hour display. By pressing the right rotary control or multifunction button , the set time is accepted. The program returns to the System Settings menu. Saving position! Confirm by pressing the right rotary control. Entering a Name for Position. Press the right rotary control for more than 2 seconds to confirm the name entered.
With the multifunction buttons or , the time will be changed in half-hour increments. Highlight the small tick and briefly press the right rotary control. With the right rotary control , select the desired position in the Destination Memory and press to confirm. Calling up Position! Call up Destination Memory see page 38 and select destination with the right rotary control. Note: If the position is outside a digitised area, the driver is guided along the digitised route nearest to the destination.
To reach the destination, follow the direction arrows. Selecting a game Setting the language! Select a game using the right rotary control. Select the language using the right rotary control. The language selection is applied when the control is pressed, and the language is installed. You can choose either a male or a female voice for certain languages.
Select the voice using the right rotary control. The voice is applied and installed by pressing the control. The system returns to the system settings menu after installation. Selecting the units of measurement! Select the units of measurement using the right rotary control.
Fahrtdauer und gefahrene Kilometer abrufen! Linken Drehregler! Es wird die Fahrtdauer, die gefahrenen Kilometer und die Durchschnittsgeschwindigkeit angezeigt. Hierzu ist eventuell das Einlegen der Navigations-CD erforderlich.
Die Liste der Einstellungen wird wieder angezeigt. Aktuelle Uhrzeit abrufen! Die aktuelle Uhrzeit und das aktuelle Datum werden angezeigt.
Die Kilometerangaben entsprechen der direkten Entfernung Luftlinie zwischen dem Sonderziel und dem aktuellen Standort. Die Pfeile hinter den Entfernungsangaben deuten die Luftlinienrichtung zum entsprechenden Sonderziel an z. Sonderziel liegt in Fahrtrichtung, Sonderziel liegt entgegen der Fahrtrichtung.
Nach kurzer Zeit erscheint die folgende Anzeige. Die hier in den Bildern gezeigten Kategorien und Sonderziele sind Beispiele. Um die Eingabe eines Sonderziels von der Sonderziel- bzw. Die vorliegende Lizenz berechtigt nicht zur Vergabe von Unterlizenzen.
Die Nutzung der Daten ist nur in diesem spezifischen Becker-System gestattet. Die aktuelle Position kann gespeichert und im Zielspeicher abgelegt werden. Durch den Stern kann man, auch wenn eine unbekannte Sprache eingestellt wurde, erkennen mit welchem Eintrag die Sprache eingestellt werden kann. Mit der Multifunktionstaste bzw.
UHR an-! Standort aufrufen! Um das Ziel zu erreichen, muss den Richtungspfeilen gefolgt werden. Diese Einstellung kann z. Die vom Navigationssystem angezeigte Geschwindigkeitsbegrenzung kann im Einzellfall falsch sein.
Der Fahrer muss in jeder Situation selbst entscheiden, ob er die angezeigte Geschwindigkeitsbegrenzung befolgt. Page 47 Navigationsbetrieb! Befahren Sie bei eingeschalteter Speedlimit Anzeige eine Strecke mit einer Geschwindigkeitsbegrenzung und diese ist auf der Navigations-CD gespeichert wird im rechten Teil der Anzeige das entsprechende Symbol mit der Geschwindigkeitsbegrenzung angezeigt. Der zuletzt eingestellte Wellenbereich wird eingestellt.
Im Rundfunkbetrieb Taste cken. Wellenbereich FM einstellen! Seek Name angezeigt wird. Rechten Drehregler drehen. Ein automatischer Sendersuchlauf beginnt. Speichern: Es lassen sich je 12 Frequenzen oder Programme abspeichern. Multifunktionstaste bzw. Der gespeicherte Sender wird aufgerufen. Handabstimmung FM! Um die Autostore Speicherebene zu verlassen, mit Multifunktionstaste die Autostore Speicherebene ausschalten Autostore off. Jetzt rechten Drehregler!
In diesem Zustand kann es vorkommen, dass durch RDS-Diversity ein Umschalten zwischen verschiedenen Regionalprogrammen mit unterschiedlichen Sendeinhalten erfolgt. Werden mehrere Regionalprogramme von einer Sendeanstalt ausgestrahlt, so wird dies erst bei der Anwahl der Sendeanstalt ersichtlich. Bei der Anwahl einer dieser Sender z. Mit der Multifunktionstaste die Regionalisierung ein- on oder ausschalten off. Nur so kann der daraus resultierenden Unfallgefahr vorgebeugt werden.
Mit der Multifunktionstaste den Radiotext einschalten. Das Autoradio filtert, aus den vom Sender angebotenen Daten, eine Radiotext Information heraus und stellt sie dar. So kann z. Wenn TP aktiviert ist wird im Display durch auf den aktivierten Verkehrsfunk hingewiesen. Nach dem Umschalten auf Normalanzeige ist TP abgeschaltet. EON-Sender eingestellt ist. Die Stummschaltung ist nun aktiviert. Es werden nur Verkehrsfunkdurchsagen, Navigationsansagen und Telefonanrufe durchgeschaltet.
Multifunktionstaste Ausschalten:! Drehen Sie den linken Drehregler. Die Stummschaltung wird aufgehoben. Bei der Einstellung Audio Sig. Das Display klappt nach unten und der CD-Schacht wird sichtbar. Jetzt das Display wieder nach oben klappen. Das Display klappt nach unten und die CD wird ausgeworfen. CD entnehmen. Das Display wieder nach oben klappen. Hinweis: Wird der letzte Titel erreicht, erfolgt ein Wechsel auf den ersten Titel.
Analog erfolgt ebenfalls ein Wechsel vom ersten auf den letzten Titel. Durch Loslassen der Multifunktionstaste bzw. Titelwiederholung Repeat! Im Display erscheint. Der Schriftzug stellt. Danach werden die Titel der aktuellen CD in beliebiger Reihenfolge abgespielt. Der Schriftzug Rnd wird invers dargestellt. Titelanzahl anzeigen! Es wird die aktuelle Titelnummer und die gesamt Titelanzahl angezeigt. Beachten Sie hierbei jedoch die rechtlichen Vorgaben.
0コメント